Frigidaire System Messages

Complete Troubleshooting & Meaning Guide

Power & Startup Messages
PF
Power Failure Detected
  • Check household power supply.
  • Reset circuit breaker if tripped.
  • Wait 1–2 minutes before restarting unit.
  • Reprogram settings if needed.
RESET
System Restart Required
  • Turn off power for 5–10 minutes.
  • Restart appliance after reset.
  • Check for recurring error messages.
  • Inspect control board if issue persists.
Control & Lock Messages
LOC
Control Lock Active
  • Press and hold lock button for 3–5 seconds.
  • Refer to model-specific unlock method.
  • Ensure no stuck buttons on panel.
  • Reset power if lock remains active.
Safety & Temperature Messages
HOT
Overheat Warning
  • Allow appliance to cool down completely.
  • Check ventilation openings for blockage.
  • Clean filters or airflow passages.
  • Do not restart until temperature normalizes.
Door & Operation Messages
DOOR
Door Not Closed
  • Ensure door is fully closed and latched.
  • Inspect door switch or sensor.
  • Check for obstruction in door seal.
  • Realign or repair door latch if needed.
System Error Messages
ERR
General System Error
  • Reset appliance power supply.
  • Check for multiple error codes.
  • Inspect control board connections.
  • Contact technician if error persists.
COOL
Cooling Cycle Active
  • Wait for cooling cycle to complete.
  • Do not open doors during operation.
  • Ensure proper ventilation around unit.
  • System will resume normal mode automatically.
Important: If system messages persist repeatedly, disconnect power and contact a certified Frigidaire technician.